2015-2023 Dodge Challenger Fitment: Which Bumper Brackets, Covers, and Headlights Fit Your Trim
The third-generation Challenger ran from 2008 to 2023, but the front end changed in 2015, and a 2014 part won't bolt up to a 2015 car. If you're shopping for a 2015-2023 Dodge Challenger bumper bracket, a bumper cover, or a headlight, the trim, body style, and options on your car decide which one is right.
Quick answer:
- 2015 is the cutoff. The refresh changed the front fascia and headlights, and catalogs list 2008-2014 parts separately.
- Trim and body matter. Fog lamps, sensor holes, and standard vs. widebody all show up in fitment notes.
- Bumper brackets are left and right parts. Listings commonly identify 68375014AA as the driver side and 68375013AA as the passenger side. Buy the pair when both are worn or you're replacing the cover.
- Headlights come as halogen or HID. They aren't interchangeable, so check the connector first.
Why 2015 Is the Cutoff: What the Refresh Changed
Dodge updated the third-generation Challenger nearly every year after its 2008 launch, but the 2015 model year brought the first real facelift. The new look included redesigned headlights with halo-style LED daytime running lights, and owners describe smoother contours on the front fascia.
What that means for parts:
| Part | 2008-2014 | 2015-2023 |
|---|---|---|
| Headlights | Original shape | Different shape, with a different wiring harness and body control module setup, according to owners |
| Front bumper cover | Original fascia | Redesigned fascia |
| Bumper brackets | Listed under their own part numbers | Listed under their own part numbers |
Owners who tried to fit 2015-style headlights to older cars report removing the front fascia, changing harnesses, and reprogramming. It's possible but it's a project, and it isn't a bolt-on swap.
This part commonly fits 2015-2023 Challengers — always confirm against your vehicle's exact trim and engine and the product's fitment data before buying. The same goes in reverse: don't order a 2008-2014 part for a newer car.
If your Challenger is a 2015 or newer, shop the 2015-2023 listings. If it's older, shop 2008-2014.
Trim Differences That Matter: SXT/GT vs. R/T vs. Scat Pack/SRT, Plus Widebody Flares
Trims on the 2015-2023 Challenger run from SXT and GT through R/T, Scat Pack, and the SRT models. The factory front fascia styling varies by trim and package, and the details that decide fitment show up in the listing notes.
What to check against your car:
| Check | Why It Matters |
|---|---|
| Trim (SXT/GT, R/T, Scat Pack, SRT) | Fascia styling and grille details differ by trim |
| Standard body or widebody | Widebody cars have different fender flares, and listings note "without wide body" or "without fender flares" |
| Fog lamps | Some covers are listed "without fog lamps" |
| Front sensor holes | Some covers are listed "with" or "without sensor holes" |
| Finish | Primed, painted, or textured. See our bumper cover finish guide [link to primed bumper cover finish guide] |
Watch out for "Hellcat-style" conversion covers. Sellers offer them to give a standard Challenger the wide-mouth SRT Hellcat look. They aren't factory replacements for your trim. One maker says its kit is for standard-body cars only, that widebody models need a different fitment, and that it isn't compatible with front parking sensors.
If you want to keep your car factory-correct, pick a replacement listed for your exact trim. If you want the conversion look, read the fitment notes before you order.
Bumpers are part of the front-end structure around your sensors and lights. If you're unsure about fit or installation, consult a professional mechanic or body shop.
2015-2023 Dodge Challenger Bumper Brackets: Driver vs. Passenger, and When to Buy the Pair
The bumper support brackets hold the ends of the front bumper cover in place. Listings commonly describe them as plastic, and they're a small part that gets replaced a lot. A cracked or missing bracket often shows up as a cover that sags, gaps, or flexes at the corner.
Left and right are different parts. Listings commonly identify these numbers:
- 68375014AA: front left (driver side)
- 68375013AA: front right (passenger side)
Treat these as a starting point rather than a guarantee. Listings vary on year range, with some saying 2015-2021 and others 2015-2023. Some also note "for models with No. 1 bumper bracket," and other bracket numbers appear in four-piece kits, so your car may use more than one bracket per side. Confirm against the product's fitment data and your parts diagram.
When to buy the pair:
- Both sides are cracked, loose, or missing.
- You're replacing the bumper cover. Removing it often stresses old plastic, and a new cover on brittle brackets can sag again.
- One bracket broke and the other is the same age. Plastic that's gone brittle tends to fail next.
When one is enough: if one side broke from a clear cause and the other is intact and tight, a single bracket is a reasonable choice.
A loose bumper cover can flap at speed. Fix it before long highway drives, and consult a professional if you aren't sure how the cover attaches.
Pair the brackets with the cover if you're replacing it, and check both sides if one failed.
Headlights: Halogen vs. HID/LED Projector, and the Connector Check
The 2015-2023 Challenger's headlights use projector lenses and come in two factory types: halogen and HID (xenon).
| Type | What to Know |
|---|---|
| Halogen projector | A retailer guide lists a 9012 (HIR2) bulb. Typically found on lower trims |
| HID projector | A retailer guide lists a D3S bulb, with a ballast and igniter. Typically found on higher trims |
| LED (aftermarket) | Some aftermarket assemblies use LED. Many are listed for factory halogen cars only |
Which type your car has depends on the trim and package, and retailer guides don't agree on the trim breakdown, so don't assume. Halogen and HID systems aren't interchangeable. The wiring and connectors differ, and an HID unit needs a ballast.
Two more variants to know:
- Air-Catcher headlight. Some cars have a headlight with a hollow tube that routes air to the engine. Listings note when an assembly doesn't have the air intake.
- Halo DRL. The LED halo ring is part of the 2015-and-newer design.
The connector check: before you order or install, compare the connector on your old headlight (or the harness behind it) with the replacement. HID cars have a different plug and locking collar than halogen cars, according to owners. Also check whether the listing includes bulbs and, for HID, the ballast.
Don't put LED or HID bulbs in a housing built for halogen. The beam can scatter and blind oncoming drivers. If you want LED, look for a complete assembly made for it, with DOT and SAE markings.
Headlights are safety equipment. Owners report that on these cars the headlights mount to the body, and the front fascia has to come off to change them. Our headlight DIY guide covers the process [link to how to replace a headlight housing guide]. If unsure, consult a professional mechanic, especially with HID.
These parts commonly fit 2015-2023 Challengers — always confirm against your vehicle's exact trim and engine and the product's fitment data before buying, including halogen vs. HID.
How to Confirm Fitment With Your VIN or the Part Number on the Old Piece
The most reliable checks are the number on the old piece and your VIN.
- Find the part number on the old piece. Brackets, covers, and headlights often have it molded or stamped on the back. Our guide to finding the right part by OEM part number shows where to look.
- Use your VIN. A dealer parts counter can decode it to confirm your trim, options, and body style.
- Check the visible options. Look for fog lamps, front sensor holes, widebody flares, and the headlight type.
- Match year, make, model, trim, and engine on the listing.
- Compare the new part with the old one before you install it.
If the old piece is gone, search by year, trim, and side, and compare the listing photos with your car.
Frequently Asked Questions
Will 2008–2014 Challenger parts fit a 2015 or newer car?
Generally no. The 2015 refresh changed the front fascia and headlights, and catalogs list the two ranges separately. Confirm the year range on the listing.
Which side is Challenger bumper bracket 68375014AA?
Listings commonly identify 68375014AA as the front left (driver) side and 68375013AA as the front right (passenger) side. Confirm against the product's fitment data.
Does my Challenger have halogen or HID headlights?
It depends on the trim and package. Check the plug on the old headlight and your VIN-based build information, because the two types aren't interchangeable.
Do widebody Challengers use different front parts?
Listings and conversion-kit makers note differences, such as "without wide body" and "without fender flares." Confirm your body style before ordering.
Should I replace both bumper brackets at once?
Often, yes, especially if you're replacing the cover or both sides are brittle. If one side is intact and tight, a single bracket can be enough.
Shop Dodge Challenger Parts
Shop Challenger Bumper Covers → https://partsdistrict.com/collections/bumper-cover
Shop Challenger Headlights → https://partsdistrict.com/collections/headlight-assembly
Shop by Year and Trim → https://partsdistrict.com/pages/shop-by-vehicle